tile cleaning | Grout Cleaning | grout cleaning service

 Tile Cleaning  and  Maintenance

tile and grout cleaning | tile cleaning| tile maintenance |grout cleaning service |porcelain tile care and maintenance | vct tile maintenance | vinyl composition tile maintenance | Dallas TX

Tile Cleaning

Once again, the key to maintaining these types of tiles is to keep the tiles and grout clean. Having the tiles or grouts sealed helps prevent stains from getting into the grout. Once the floors get dirty, ACE uses scrubbing machines to remove the embedded soil. Sealer has to be re-applied after the floors are removed of foreign material.

 grout cleaning service| tile Cleaning |ceramic tile vs porcelain tile |ceramic tile vs porcelain tile in Dallas | ceramic tile fort worth | Dallas TXCeramic tile cleaning

Grout cleaning whether it is in the kitchen, bathroom or elsewhere is vulnerable to problems if not kept clean. Daily wipe, mop or sponge ceramic tile grout with water to remove surface debris, dirt and soap film.

Bathroom ceramic tile grout can get mildewed and moldy. In the kitchen ceramic tile grout is susceptible to food stains and dirt and grim is tracked onto floor grout.

Advance Cleaning for Any Color Grout

To treat heavy mildew, mold, grime, dirt and stains you can make cleaning solutions from common household products like baking soda and hydrogen peroxide.

You can create a paste from baking soda and water. Spread the paste over ceramic tile grout and leave it for a couple of minutes. Rinse with water and dry with paper towels.

Mix half hydrogen peroxide with half water in a spray bottle. Spray the solution on the grout. Let it stay on the ceramic tile grout for 15 minutes. Wipe it off with water and dry. For stubborn stains add baking soda to the hydrogen peroxide mixture wait until bubbling stops, apply cleaner and then gently scrub the grout with a brush.

Cleaning White or Light Color Ceramic Tile Grout

Bleach is good for eliminating mildew and mold and removing stains for tile cleaning. Add bleach to a bucket of water and use a sponge to apply to the grout, or put bleach and water in a spray bottle. Let the cleaner sit for 10 minutes the rinse and dry. Always have windows and doors open for ventilation when using bleach. Wear rubber gloves, eye protection and old cloths when working with bleach. Bleach should not be used on colored ceramic tile grout because it can wear the color away.

Specialized Ceramic Tile Grout Cleaners

If home cleaning solutions can’t get rid of problem stains, you may have to purchase special cleaners made specifically for cleaning tile grout. You can find these cleaners at hardware stores. Ceramic tile experts suggest that after the cleaner is used on the grout and rinsed with water the dirty water should be vacuumed up with a wet/dry vacuum machine. Repeat the rinsing and vacuum again.

Warnings about Grout Cleaning

Tile cleaning -Avoid cleaning products that have an acid base because they can eat away at ceramic tile grout. When a heavy-duty, acid-based cleaner is needed, closely follow the recommended application instructions.

New ceramic tile grout needs time to cure so don’t use any cleaners until the appropriate time passes. Grout that is not properly cured is susceptible to crumbling and attracting dirt.

Maintaining Ceramic Tile Grout

Seal grout to keep it from mildew, mold, staining and collecting dirt. There are different sealers for different grout areas such as bathroom, kitchen or floor. Remember that ceramic tile grout must be completely dry before using the sealer

Weekly Suggestions

We recommend that you wipe down your floor with a damp mop or a steam mop at least once a week (or more often for heavy traffic areas) with a cleaner made specifically for stone or tile that has a neutral pH. We recommend R2X Hard Surfaces Flooring Cleaner from Shaw’s line of Floor Covering Care Products. If R2X Hard Surfaces Flooring Cleaner is not available, make certain the cleaner you choose is compatible with grout cleaning (neutral pH) and will not stain the grout.

What Not To Do

  • Do not damp mop your newly installed floor for at least 72 hours. Doing so can cause damage to the grout. The grout needs at least 72 hours to dry and cure.
  • Never leave excessive water standing on the floor. Water on the floor is slippery and can leave the floor surface dull.
  • Never use a detergent or soap, because it can dull the surface or promote the growth of mildew.
  • Never use cleaners that contain acids, vinegar, chlorine or ammonia, as these chemicals can damage and discolor the grout or the surface of the stone or tile.

1.  You should allow your new ceramic tile and grout to dry for at least 72 hours after installation, before any type of maintenance occurs.

2.  Cleaning your new floor with a damp mop once a week is the best thing you can do to maintain your ceramic floor.
3.  A simple sweeping or vacuuming of your tile floor prior to mopping will remove any dust or debris.
4.  Make sure that any cleanser you have chosen is compatible with grout cleaning, (neutral pH), and will not stain the grout. 
5.  Heavy traffic areas should be mopped more often than once a week.
6.  Never use a detergent or soap because it may dull the surface.
7.  When cleaning, the entire area should be cleaned orscrubbed with the cleansing solution, through the use of a cotton mop, cloth, sponge, or non-metallic brush.
8.  The entire flooring area should then be rinsed with clean water to remove any cleaning solution residue.
9.  Cleaning unglazed tiles should be done on a regular basis using cleansers that have a neutral pH for safe regular use; these cleaners are better suited at removing grease, oils, and normal spills from unglazed products.
10.  Remember: Routine cleaners should never contain acids, vinegar, chlorines or ammonia as these chemical scan damage and discolor the grout or surface of the stone or tile.
11.  Always thoroughly rinse the flooring surface after cleaning, using clean clear water, to avoid any periodic residue build up or mold and mildew growth.

1. Grout is the mortar type material used to fill the spaces between the individual tiles, or stone. It’s purpose is simply to fill the joint between the tiles and become a permanent, integral part of the floor.

2. Neither sealing the grout nor using a 100% Epoxy Grout will guarantee against surface build up or discoloration of the grout.

3. Grout needs to be cleaned on a periodic basis to remove any surface residue build up.

4. This routine cleaning can be done with a neutral PH balanced daily-use household or commercial cleaner depending on the application.

5. When heavy-duty grout cleaning is required, you can use a professional strength tile and grout cleaner that is capable of removing grease, soap scum, body oil, mildew stains algae, and synthetic or acrylic waxes from the grout joints.