VCT Flooring, Maintenance and care

VCT flooring | VCT flooring in Dallas| VCT Floor|What is VCT flooring | VCT Commercial Flooring | VCT tile flooring |vct tiles |vinyl flooring | armstrong vct

What is VCT  Flooring (Vinyl Composition Tile)

 

VCT Flooring, vinyl composition tile, which are the 12’x12’ tiles you see in business settings needs to have either sealer or wax applied to prevent the tiles from being scratched or stained.

Sealer are harder than wax and they are used in very high traffic environments. The key is to make sure your floors have the proper amount of sealer or wax applied so it can be maintained.

Always clean or mop your VCT with a neutral cleaner to prevent damage to the sealer or wax. Once the floors start becoming dull or scratched, they will need to be serviced with a “Restore” product and high speed buffing. This process will extend the life of the sealer or wax and prolong the time between stripping and re-waxing.

LVT, luxury vinyl tile, comes from the manufacturer with a strong outer layer, which does not require a wax or sealer to be applied. Basically you keep LVT clean by mopping it with a Ph neutral product which is sold in Do It Yourself stores.

 

History of  VCT Flooring

 

In 1894, Philadelphia architect Frank Furness patented a system for rubber floor tiles. These tiles were durable, sound-deadening, easy to clean and easy to install. However, they stained easily and deteriorated over time from exposure to oxygen, ozone and solvents, and were not suitable for use in basements where alkaline moisture was present.

In 1926, Waldo Semon, working in the United States, invented plasticized polyvinyl chloride. Polyvinyl chloride (PVC) is a plastic containing carbon, hydrogen and chlorine. It is produced by the process of polymerization. Molecules of vinyl chloride monomers combine to make long chain molecules of polyvinyl chloride.

Polyvinyl chloride (PVC) based floor coverings, commonly known as vinyls made its big splash when a vinyl composition tile was displayed at the Century of Progress Exposition in Chicago. Because of the scarcity of vinyl during the war years, vinyl flooring was not widely marketed until the late 1940’s, eventually became the most popular choice for flooring in just about any hard-surface application.

Vinyl composition tile (VCT) is one of the most common types of hard surface flooring’s cleaning professionals will encounter.  It is durable, relatively easy to clean, and inexpensive when compared to most other floor types. However, when working with a new VCT floor, maximizing the floor’s benefits will depend on how well it is cared for from the very start.

Maintenance of VCT Flooring

VCT Flooring |VCT Floor Maintenance | Floor Cleaning Dallas Texas

Clean

Thoroughly sweep or vacuum the flooring to remove all loose dirt and grit

Cleaning Solution

Prepare a cleaning solution using one of the recommended pH neutral . Apply the cleaning solution with a nylon or rayon mop:

  • Rayon fibers for higher absorbency, less linting, and more launderings than cotton mops
  • Looped ends reduce fraying for better performance and launderability than cut-end mops

Let cleaning solution set for 5 to 15 minutes. (Do not let the solution dry)

Scrub

Machine scrub the floor (using a single disc rotary machine (175 – 350 RPM) equipped with a blue or green pad.) to remove soils and any protective coatings the manufacturer may have applied. Us a 22 to 28 gauge soft nylon brush.

Remove  Solution

Us a wet vacuum or a mop to remove the solution and than rinse the floor thoroughly with clean water. allow the flooring to dry completely.

Flooring Sealer

VCT floors should be sealed and/or finished to protect the floor.  The number of coats depends on such factors as the customer’s expectations, traffic conditions, budget, climate, etc. Recommend appling three to five coats of a recommended floor finish according to label instructions. Allow the floor time to finish drying between coats.

Preventive Care:

An effective barrier matting system should be installed at all entrances to reduce cleaning costs and extend the life of the floor.

Protect the flooring from damage by using good quality protective feet and casters for chairs, tables, and other furniture. Use products designed for resilient floors. Caster or wheel damage can be avoided with the use of chair pads.

Routine / Daily Cleaning:

It is very important to clean flooring at a frequency consistent with the amount and type of traffic.

Daily cleaning is recommended.

Thoroughly sweep or vacuum the flooring to remove all loose dirt and grit.

Prepare a cleaning solution using a recommended pH neutral cleaner. The dilution ratio depends on light to heavy soil conditions.

Damp mop the cleaning solution onto the floor.

Allow the flooring to dry completely.

Remove minor stains and scuffs in conjunction with the damp mopping. Use a white, blue or green pad if required.

Periodic / Deep Cleaning

When routine / daily cleaning no longer provides adequate results, a more aggressive deep cleaning is required to thoroughly clean the floor.

Thoroughly sweep or vacuum the flooring to remove all loose dirt and grit.

Prepare a cleaning solution using one of the recommended pH neutral cleaners The dilution ratio depends on light to heavy soil conditions.

Apply the cleaning solution with a nylon or rayon mop.

Let cleaning solution dwell for 5 to 15 minutes. IMPORTANT – do not let the solution dry.

Scrub the flooring using a single disc rotary machine (175 – 350 RPM) equipped with a blue or green pad. Do not use brown or black pads. NOTE: A 22 to 28 gauge soft nylon brush must be used on SR (slip resistant) tiles.

Remove the cleaning solution using a wet vacuum or a mop.

Rinse the floor thoroughly with clean water.

Allow the flooring to dry completely. NOTE: The cleaning process may need to be repeated on heavily soiled floors.

Apply three to five coats of a recommended floor finish according to label instructions.

Allow the floor finish to dry completely between coats.